VoltWatch2 4.8V/6V Rx Battery Monitor (PART# HCAP0332)
This is the VoltWatch2 on-board Receiver Battery Monitor for
4.8V and 6V NiCd and NiMH receiver packs.
This mounts on the outside of the airplane, so you can see at a glance
the status of the receiver battery mounted inside.
FEATURES: 7-LEDs provide instant, accurate battery voltage status of Low, Safe,
or Max. Only one LED glows at a time
Small switch to select 4.8V or 6V battery
Very lightweight, only .15oz (4.3g) unit can mount on the side
of the fuselage, or under the plane's canopy
Draws amazingly low current - from 4-34mA depending on the battery
Plugs into any open receiver channel using a Futaba J connector
One year warranty
INCLUDES: One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
One 1.5"x1" piece of double sided mounting tape
REQUIRES: Plugging into any unused receiver port
Mounting onto the airplane with double-sided tape
SPECS: Length: 1.65" (42mm)
Width: .63" (16mm)
Height: .16" (4mm)
Weight: .15oz (4.3 grams)
Current Draw: approx 4-34mA
Lead Length: 198mm (7.79")
COMMENTS: This has a Futaba J connector pre-installed. For radios other than
Futaba, you will have to change or modify the plug.
Because of reverse polarity, if you would like to use this with the
older Airtronics batteries, you must also purchase AIRM4400
BOX DIMENSIONS: 3.25" W. X .25" H. X 4.00" L.
BOX WEIGHT: .03 LBS.